gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 12251 > < Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 12249
Page 5
background image

12.

Tighten the nut until the shoulder bottoms out.

Tighten

Tighten the nut to 12-14 N.m (106-124 lb in).

13.

Install the door detent spring. Use the J 36604, or equivalent. Refer to the Doors subsection in the appropriate Service Manual for the door spring
installation procedures.

14.

Open and close the door several times in order to test for noise, high effort and free movement of the detent link.

Parts Information

P/N

Description

Qty

15043450

Link Kit, Frt Side Dr

1

Hinge Detent

1050109

Grease

1

(In Canada use
P/N 5264008)

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor
Operation

Description

Labor Time

B4057

Link or Spring, Frt Dr Hold

Use published

Open (Both) - Replace

labor
operation time

Technical Service Bulletin # 99-08-64-024 Date: 991001

Doors (Front) - Noisy/Binding/Won't Stay Open.

File In Section:  08 - Body and Accessories 

Bulletin No.: 99-08-64-024

Date:  October, 1999

TECHNICAL

Subject:
Noisy or Binding Front Doors, Doors Hard to Open or Will Not Stay Open
(Install New Door Detent Link)

Models:
1998-99 Chevrolet and GMC C/K Models

Condition

Some owners may comment on any of the following conditions:

^

The front doors are difficult to open.

^

The doors may not stay open.

^

The doors are noisy and/or binding when opened.

Cause

A worn or improperly operating door hinge detent link may cause this condition.

Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 12251 > < Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 12249