K 2500 Truck 4WD V8-6.0L VIN U (1999)
5. Remove the screws holding the ashtray housing to the rear of the IP lower trim panel.
6. Remove the ashtray housing.
INSTALLATION PROCEDURE
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the screws holding the ashtray housing to the rear of the IP lower trim panel.
Tighten
Tighten the ashtray housing screws to 2 N.m (18 lb in).
2. Connect the ashtray lamp wiring harness.
