K 2500 Truck 4WD V8-6.0L VIN U (1999)
1. Release the parking brake
2. Remove the park brake lever.
3. Roll the carpet back to access cable grommet.
4. Raise and support the vehicle.
5. Disengage the grommet and the cable from the floor pan.
6. Disconnect the front cable from the intermediate cable.
7. Remove the cable from the body mount by depressing the retaining tabs.
8. Remove the cable.
INSTALLATION PROCEDURE
1. Install the cable.
2. Snap the retainer tabs into the body mount.
