K 2500 Truck 4WD V8-6.0L VIN U (1999)
Compressor Clutch Bearing: Service and Repair
Clutch Rotor and/or Bearing Removal
TOOLS REQUIRED
-
J 6083 Snap Ring Pliers
-
J33023-A Puller Pilot
-
J41552 Pulley Puller
1. Remove the clutch plate and hub assembly.
2. Use the J 6083 in order to remove the following components:
-
The pulley rotor (1)
-
The bearing assembly retaining ring (2)
3. Install the J 33023-A to the front head.
4. Install the J41552 down into the inner circle of slots (1) in the rotor.
