K 2500 Truck 4WD V8-6.0L VIN U (1999)
4. Install the grille.
5. Install the hose to the accumulator using new sealing washers.
6. Install the nut at the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
7. Install the refrigerant hose to the compressor using new sealing washers.
8. Install the refrigerant hose mounting bolt.
Tighten
Tighten the nut to 34 N.m (25 lb ft).
9. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging. See: Refrigerant/Service and Repair
10. Inspect the system for leaks. Refer to Leak Testing. See: Testing and Inspection
