K 2500 Truck 4WD V8-6.0L VIN U (1999)
14. Install the steering wheel onto the steering shaft.
15. Install the steering wheel nut.
-
Tighten the steering wheel nut to 40 Nm (29 ft. lbs.).
16. Install the horn switch.
17. Install the inflator module. Refer to Infl Rst Steering Wheel Module Replacement in Air Bags and Seat Belts.
18. Install the tilt lever. Refer to Tilt Lever Replacement - On Vehicle under Steering Column.
19. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts.
20. Connect the negative battery cable.
Perform the Idle Learn Procedure in Powertrain Management.
