K 2500 Truck 4WD V8-6.0L VIN U (1999)
5. Install the fuel rail assembly.
6. Tighten the fuel filler cap.
7. Connect the negative battery cable.
8. Inspect for leaks.
8.1. Turn the ignition switch ON for 2 seconds.
8.2. Turn the ignition switch OFF for 10 seconds.
8.3. Turn the ignition switch ON.
8.4. Check for fuel leaks.
NOTE: Refer to the Fastener Notice in Service Precautions.
9. Install the engine sight shield.
Tighten
Tighten the engine sight shield bolts to 10 N.m (89 lb in).