K 2500 Truck 4WD V8-6.0L VIN U (1999)
1. Install the fuel pressure connection core assembly (24) using a standard valve core removal and installation tool.
2. Tighten the fuel tiller cap.
3. Connect the negative battery cable.
4. Inspect for leaks.
4.1. Turn the ignition switch ON for 2 seconds.
4.2. Turn the ignition switch OFF for 10 seconds.
4.3. Turn the ignition switch ON.
4.4. Check for fuel leaks.
5. Install the fuel pressure connection valve cap (23).
6. Install the engine sight shield.
