K 2500 Truck 4WD V8-6.0L VIN U (1999)
Fuel Rail: Service and Repair
Fuel Rail Assembly Replacement
REMOVAL PROCEDURE
TOOLS REQUIRED
^
J 34730 - 1A Fuel Pressure Gauge
^
J 37088-A Tool Set, Fuel Line Quick-Connect Separator
An eight digit identification number (1) is located on the fuel rail assembly. Refer to this model identification number if servicing or part replacement
is required.
CAUTION: Refer to the Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the engine sight shield.
3. Before removal, clean the fuel rail assembly with a spray type engine cleaner, GM X-30A or equivalent, if necessary. Follow the package
instructions. Do not soak fuel rails in liquid cleaning solvent.
4. Remove the engine sight shield bracket bolts and bracket.