K 2500 Truck 4WD V8-6.0L VIN U (1999)
Fuel Tank Unit: Service and Repair
Fuel Sender Assembly Replacement
Removal Procedure
Tools Required
^
J 34730-1A Fuel Pressure Gauge
^
J 39765 Fuel Sender Lock Nut Wrench
1. Disconnect the negative batter cable.
2. Relieve the fuel system pressure.
3. Drain the fuel tank. See: Fuel Tank/Service and Repair/Procedures
4. Remove the fuel tank.
Notice: Do Not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the
joints.
5. Remove the fuel sender assembly retaining ring using the J 39765 Fuel Sender Lock Nut Wrench.
6. Remove the fuel sender assembly and the seal. Discard the seal.
