K 2500 Truck 4WD V8-6.0L VIN U (1999)
17. Connect the module (1) to the adapter (2) on the SIR deployment harness (3).
18. Firmly seat the adapter into the module connector.
19. Clear the area of people.
Caution: Refer to Inflator Module Deployment Outside vehicle Caution in Cautions and Notices.
20. Separate the two banana plugs on the SIR deployment harness.
Important: The rapid gas expansion involved with deploying an air bag is very loud. Notify all the people in the immediate area that you intend to
deploy the inflator module
Important: When the air bag deploys, the inflator module may jump vertically. This is a normal reaction of the inflator module to the force of the rapid
gas expansion inside the air bag.
21. Connect the SIR deployment harness wires to the power source.