K 2500 Truck 4WD V8-6.0L VIN U (1999)
1. Install the hex lock nut (1) onto the pinion while holding the valve stub shaft.
NOTICE: Refer to Fastener Notice in Service Precautions.
-
Tighten the hex lock nut (1) to 30 Nm (22 ft. lbs.).
2. Install the dust cover (2) to the rack and pinion gear assembly.
3. Install the stub shaft bearing annulus assembly (1) onto the valve stub shaft (2).
4. Install J 29810 onto the valve stub shaft.
5. Lubricate the stub shaft seal (3) with grease.
6. Install the stub shaft seal (3) into the rack and pinion gear assembly.
7. Install the retaining ring (2) into the groove in the rack and pinion gear assembly.
8. Install the spool shaft boot (1) onto the rack and pinion gear assembly.
