K 2500 Truck 4WD V8-6.0L VIN U (1999)
5. Inspect the shaft (6) for bent or damaged threads.
6. Clean the tapered surface of the steering knuckle (1).
INSTALLATION PROCEDURE
1. Lubricate the tie rod threads with chassis lubricant.
2. Install the tie rod end (4) to the shaft (6).
3. Install the outer tie rod ball stud (3) to the steering knuckle (1).
4. Use the J 29193 in order to install the outer tie rod ball stud.
NOTICE: Refer to Fastener Notice in Service Precautions.
-
Tighten the J 29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
5. Install the new prevailing torque nut (2) to the outer rod ball stud (3).