K 2500 Truck 4WD V8-6.0L VIN U (1999)
-
Tighten the nuts to 190 Nm (140 ft. lbs.).
6. Connect the upper control arm to the steering knuckle.
7. Install the halfshaft.
8. Install the new nut to the upper ball joint stud.
-
Tighten the nut to 50 Nm (37 ft. lbs.).
9. Install the retaining bolts for the brake hose and wheel speed sensor brackets.
-
Tighten the bolts to 9 Nm (80 inch lbs.).
10. Install the tire and wheel assembly.
11. Remove the safety stands.
12. Lower the vehicle.
13. Verify the wheel alignment. Refer to Alignment.
