K 2500 Truck 4WD V8-6.0L VIN U (1999)
6. Remove the adjustment bolt (3) and the adjuster nut (4) (25 Series).
7. Remove the J 36202, allowing the torsion bar to unload.
8. Remove the adjustment arm by sliding the torsion bar forward until the torsion bar clears the adjustment arm. Use your hand to support the
adjustment arm as the adjustment arm releases from the torsion bar.
9. Remove the torsion bar crossmember bolts (4) from the weld nuts (1) (15 Series).
10. Remove the upper link mounting nuts (1) and the bolts (2) (25 Series),
11. Remove the torsion bar crossmember
12. Remove the torsion bars.
IMPORTANT: Note the position of the torsion bars as the left and right bars are different.
INSTALLATION PROCEDURE
