K 2500 Truck 4WD V8-6.0L VIN U (1999)
8. Install the retainer securing the shift cable to the steering column.
9. Install the shift cable to the support.
Notice: Refer to Fastener Notice in Service Precautions.
10. Install the bolt securing the shift cable support to the brace.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
11. Install the carpet and insulation around the driver's area. Refer to Carpet Replacement - Front in Interior Trim.
12. Install the driver's seat from vehicle. Refer to Seat Replacement - Front Bucket in Seats.
13. Install the steering column shroud. Refer to Steering Column Trim Covers - Assemble -Off Vehicle (Column Shift) in Steering.
14. Raise the vehicle. Refer to Vehicle Lifting.
