K 2500 Truck 4WD V8-6.0L VIN U (1999)
6. Install the torque converter clutch solenoid (1) and retainer clip (2).
7. Install the wiring harness and bolts.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
8. Install the torque converter clutch solenoid bolts.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
9. Install the bolts securing the pressure switch to the control valve body.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
