K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Radio/Stereo: Service and Repair
Rear Seat Audio Control Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove the negative battery cable.
2. Remove the console storage bin.
3. Remove the RSA controls from the console by pressing in the 6 tabs. There are 2 tabs on the top, 2 tabs on the bottom, 1 tab on the right, and 1 tab
on the left of the RSA.
4. Remove the rear seat audio (RSA) connectors.
INSTALLATION PROCEDURE
1. Install the rear seat audio connectors.
2. Install the rear seat audio control into the console.
3. Install the console storage bin.
4. Install the negative battery cable.
