gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 9964 > < Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 9962
Page 13
background image

(Install New Door Detent Link)

Models:
1998-99 Chevrolet and GMC C/K Models

Condition

Some owners may comment on any of the following conditions:

^

The front doors are difficult to open.

^

The doors may not stay open.

^

The doors are noisy and/or binding when opened.

Cause

A worn or improperly operating door hinge detent link may cause this condition.

Correction

A new door detent link kit, which includes a new rivet, washer, and nut, has been developed to correct this condition. Install a new detent link kit on
affected vehicles. Use the following procedure and the part numbers listed below.

Tools Required

J 36604 Door Hinge Spring Compressor

1.

Remove the door spring using the J 36604, or equivalent.

2.

Using a punch (1), mark a spot for drilling at the top center of the old rivet (4).

Notice:

In the following step, do not drill into the hinge strap or unnecessary, additional repairs may result.

Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 9964 > < Doors (Front) - Noisy/Binding/Won't Stay Open.|Page 9962