K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Brake Pedal Assy: Service and Repair
REMOVAL PROCEDURE
CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live" exposed
electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components.
Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.
1. Disconnect the negative battery cable.
2. Disable the SIR.
3. Remove the electrical connector from the stoplamp switch.
4. Remove the pushrod retainer.
5. Remove the stoplamp switch.
6. Remove the pushrod.
7. Remove the nut.
8. Remove the brake pedal bolt.
9. Remove the bushings and the spacer.
10. Remove the brake pedal.
