K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
INSTALLATION PROCEDURE
1. Install the brake pedal.
2. Install the spacer and the bushings.
3. Install the bolt and nut.
^
Tighten the nut to 47 Nm (35 ft. lbs.).
NOTICE: Fastener Notice in Service Precautions.
4. Install the pushrod.
5. Install the stoplamp switch.
6. Install the pushrod retainer.
7. Install the electrical connector on the stoplamp switch.
8. Enable the SIR.
9. Connect the negative battery cable.
