K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Valve Cover: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the battery negative cables from the batteries.
2. Remove the CDR valve from the valve rocker arm cover.
3. Remove the upper intake manifold from the lower intake manifold.
4. Remove the wiring harness from the right side of the engine assembly.
5. Remove the wiring harness from the left side of the engine assembly.
6. Remove the lower intake manifold from the engine assembly.
7. Remove the turbocharger if replacing the right valve rocker arm cover.
8. Remove the oil level indicator and tube if replacing the left valve rocker arm cover.
9. Remove the heater hoses from engine assembly.