K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Control Assembly: Service and Repair
Primary System
Heating System Only
Remove or Disconnect
1. Instrument cluster trim plate.
2. Control assembly by releasing the snap-fit retainers with a small screwdriver.
3. Electrical connection.
4. Cables from the control assembly by releasing retainers.
5. Blower switch.
-
Remove the blower switch rotary knob and the retaining clip from the shaft of the blower switch.
Install or Connect
1. Blower switch.
A. Hold the blower switch in position and install the retaining clip.
B. Install the blower switch rotary knob.
2. Cables to the control assembly.
3. Electrical connection.
4. Control assembly to the instrument panel by snapping in.
5. Instrument cluster trim plate.
-
Check circuit operation.
Heating & A/C System
HVAC Control Panel & Module
Remove or Disconnect
1. Instrument cluster trim.
2. Control assembly.
-
Release the retainers using a small screwdriver; then pull the control assembly out from the instrument panel.
3. Electrical connectors, as necessary.
Install or Connect