K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Marker Lamp: Service and Repair
Marker Lamp Replacement - Side (Composite)
REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the grille.
3. Remove the nuts.
4. Remove the sidemarker and/or the reflector lens.
5. Remove the bulb from the electrical connector.
INSTALLATION PROCEDURE
1. Install the bulb to the electrical connector.
2. Install the sidemarker and/or the reflector lens.
3. Install the nuts to the sidemarker.
4. Install the grille.