K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
3. Fill the transmission to the level of the fill plug hole. Refer to Lubrication Specifications.
4. Apply sealant to the oil fill plug threads. Use Teflon (R) GM P/N 1052080 or the equivalent.
5. Use the J36511 in order to install the oil fill plug.
-
Tighten the oil fill plug to 60 Nm (44 ft. lbs.).
6. Remove the safety stands.
7. Lower the vehicle.
NV4500
REMOVAL PROCEDURE
IMPORTANT: Drain the transmission after a short period of operation when the oil is warm. This allows any existing fluid in the system to be
expelled when the oil is drained.
1. Raise the vehicle. Refer to Vehicle Lift Points.
2. Support the vehicle with safety stands.
3. Clean all the dirt and all the oil from around the fill plug and the oil drain plug.
