K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
-
A high capacity air filter can be used if necessary (AC type A 1306C).
INSTALLATION PROCEDURE
1. Install the air inlet elbow on the filter by pushing together (filter by pushing on inlet elbow).
2. Install the air cleaner filter with the air inlet elbow attached into the housing.
3. Install the MAF sensor electrical connector.
4. Install the air cleaner cover into the housing and clip into place.
5. Install air cleaner inlet elbow into turbocharger inlet elbow.
6. Tighten elbow clamp.
Tighten
-
Tighten elbow clamp to 5 Nm (45 lb. in).
