K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Keyless Entry Module: Service and Repair
REMOVAL PROCEDURE
1. Remove the daytime running lights (DRL) module.
2. Disconnect the electrical connector.
3. Remove the remote control door lock receiver retainer (3).
4. Remove the remote control door lock receiver (2).
INSTALLATION PROCEDURE
1. Install the remote control door lock receiver (2).
2. Install the remote control door lock receiver retainer (3).
3. Connect the electrical connector.
4. Install the DRL module.
5. Inspect the circuit operation of the DRL module.
