K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Description
5. Install the retractor and belt to the floor.
6. Install the bolt through the retractor into the floor panel weld nut.
Tighten
^
Tighten the bolt to 55 N.m (41 lb. ft).
Description
7. Install the bolt through the anchor plate and washer into the door pillar weld nut.
Tighten
^
Tighten the bolt to 55 N.m (41 lb. ft).
8. Install the cover over the door pillar anchor plate.
