K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Case: Service and Repair
Case Cover, A/T
REMOVAL PROCEDURE
1. Remove the two bolts securing the transmission heat shield to the transmission.
2. Remove the transmission heat shield from the transmission.
INSTALLATION PROCEDURE
1. Install the transmission heat shield from the transmission.
2. Install the two bolts securing the transmission heat shield to the transmission.
-
Tighten the bolts to 17 Nm (13 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
