K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
1. Install the bearing to the slave cylinder.
2. Install the slave cylinder to the transmission input shaft. Ensure that the bleed screw and the coupling are positioned with the transmission ports.
3. Install the two bolts that secure the concentric slave cylinder to the clutch housing shaft.
-
Tighten the bolts to 8 Nm (71 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the transmission. Refer to Transmission Replacement (NV3500).
