K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
ASSEMBLY PROCEDURE
-
Tools Required
-
J35910 Seal Clamp Tool
-
J36652 Split Plate Swage Clamp (K10 models)
-
J36652 Split Plate Swage Clamp (K20/K30 models)
1. Inspect all of the parts for unusual wear, cracks, or other damage. Replace the CV joint assembly if necessary.
2. Put a light coat of the recommended grease on the inner (6) and the outer race (8) grooves.
3. Hold the inner race (1) at 90 degrees to the centerline of the cage (2).
4. Align the lands of the inner race (1) with the windows of the cage (2).
5. Insert the inner race (1) into the cage (2), by rotating the inner race (1) downward.
6. Insert the cage (4) and inner race into the outer race (1).
