K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Flex Plate: Service and Repair
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lift Points.
2. For all engines except the 4.3L engine, remove the access cover located at the bottom of the transmission bell housing.
3. For vehicles equipped with a 4.3L engine, remove the bolts securing the starter cover to the transmission.
4. Remove the flywheel to converter bolts.
IMPORTANT: Mark the alignment of the flywheel and the converter in order to retain a proper balance.
INSTALLATION PROCEDURE