K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Shift Cable: Service and Repair
1. Place the shift lever in the 4HI position.
2. Raise and support the vehicle.
3. Disconnect the linkage rod from the console shift lever.
4. Shift the transfer case into 4HI position (the transfer case shift lever in full forward detent).
A click sound indicates that the transfer case lever is all the way back.
5. Adjust the swivel in order to align with the notch in the console shift lever.
6. Connect the linkage rod to the console shift lever.
7. Lower the vehicle.
