K 2500 Truck 4WD V8-8.1L VIN G (2001)
Arm Rest: Removal and Replacement
Armrest Bracket Replacement
Tools Required
J 34940 Rivet Gun
Removal Procedure
1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the armrest bracket from the door.
1. Drill out the rivets using a 1/4 drill bit.
2. Disconnect the control rods from the retainers.
4. Remove the retainers and the U-nuts from the bracket.
Installation Procedure
1. Install the retainers and the U-nuts to the bracket.
2. Install the armrest bracket to the door.
1. Connect the control rods from the retainers.
2. Use the J 34940 in order to install the bracket rivets.
3. Install the water deflector.
4. Install the trim panel.