K 2500 Truck 4WD V8-8.1L VIN G (2001)
Power Door Lock Switch: Procedures
POWER DOOR LOCK SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the power accessory switch panel.
2. Disconnect the electrical connector from the door lock switch.
3. Remove the screws from the door lock switch.
4. Remove the power window and door lock switch from the switch panel.
INSTALLATION PROCEDURE
1. Install the power door lock and power window switch assembly to the switch panel, sliding the front tabs in first. Rock the switch down in order to
seat the door lock switch completely.
2. Install the screws to the door lock switch.
3. Connect the electrical connector to the door lock switch.
4. Install the power accessory switch plate.
