K 2500 Truck 4WD V8-8.1L VIN G (2001)
Important: Apply the lubricant that comes with J 42845 each time the tool is used. Failure to lubricate the J 42845 may prevent the balancer from
installing completely.
3. Using J 42845 install the balancer.
4. Tighten the J 42845 until the crankshaft balancer is completely seated against the crankshaft sprocket.
5. Remove the J 42845 from the crankshaft.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the crankshaft bolt and washer to the crankshaft.
^
Tighten the crankshaft balancer bolt to 255 Nm (189 ft. lbs.).
7. Remove the J 42847.
8. Install the starter motor.
9. Install the fan.
10. Install the A/C belt.
