K 2500 Truck 4WD V8-8.1L VIN G (2001)
18. Install the AIR pipe bolts at the exhaust manifold, if equipped.
19. Install the AIR pipe nut at the fuel rail, if equipped.
^
Tighten the AIR pipe bolts to 25 Nm (18 ft. lbs.).
^
Tighten the AIR pipe nut to 12 Nm (106 inch lbs.).
20. Connect the AIR pump pipe hose (1) to the pump pipe.
21. Reposition the AIR pump pipe hose clamp.
22. Install the air cleaner outlet duct.
23. Tighten the clamps at the throttle body and air cleaner.
^
Tighten the air cleaner outlet duct clamp to 4 Nm (35 inch lbs.).
24. Install the engine sight shield.
