K 2500 Truck 4WD V8-8.1L VIN G (2001)
6. Connect the A/C compressor hose assembly to the accumulator using new sealing washers.
7. Install the nut at the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
8. Install the A/C compressor hose assembly mounting bolt.
Tighten
Tighten the nut to 34 N.m (25 lb ft).
9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the component using the J 39400-A.
Evaporator Tube Replacement
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
