K 2500 Truck 4WD V8-8.1L VIN G (2001)
Ignition Coil: Service and Repair
IGNITION COIL(S) REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the spark plug wires at the ignition coils.
2. Disconnect the ignition coil harness connector.
3. Remove the ignition coil mounting bolts.
4. Remove the ignition coil.
INSTALLATION PROCEDURE
1. Install ignition coil.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the ignition coil attaching bolts.
Tighten
Tighten the ignition coil attaching bolts to 12 N.m (106 lb in).
3. Connect the ignition coil harness connector.
4. Connect the spark plug wires at the ignition coils.