K 2500 Truck 4WD V8-8.1L VIN G (2001)
Compressor/Pump: Service and Repair
Automatic Level Control Air Compressor Assembly Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
Important: Clean the components and the surrounding area to prevent dirt from entering the air system before disconnecting the air hose from the air
compressor.
2. Disconnect the air tube (1) from the air dryer.
3. Disconnect the electrical connection (2).
4. Remove the air inlet and hose (1) from the fuel filler neck bracket.
5. Loosen the mounting nuts.
6. Slide the air compressor (2) rearward to clear the frame slots.
7. Remove the air compressor from the vehicle.
Installation Procedure