K 2500 Truck 4WD V8-8.1L VIN G (2001)
21. Release the white cover (1).
22. Verify the white cover (1) conceals the natural colored lock (2).
23. If the white cover (1) does not conceal the natural colored lock (2), perform steps 26 through 28.
24. Test the transmission for proper shift operation.
25. It all of the gear positions cannot be achieved, the shift cable must be readjusted.
Perform steps 26 through 28.
26. Pull back the white plastic cover (1) on the center connector.
27. Pull up on the center tabs of the lock button (2).
28. Repeat steps 18 through 22.
Important:
^
Inspect shift lever pin for corrosion and replace if necessary.
^
The shift cable is a two-piece shift cable.