K 2500 Truck 4WD V8-8.1L VIN G (2001)
Note:
Transmission damage may occur when springs and other parts are mistakenly interchanged. Proper springs and other part identification is very
important.
61.
Position the support assembly so that the converter relief valve/lube regulator bore is facing upward. Then install the following components.
^
The converter relief valve (1) (big end first, the small end fits into the converter relief spring)
^
The converter relief spring (2) (Natural steel, no color, free length 44.85 mm (1.766 in))
62.
Use the J 43773 tool (2) to compress the spring. Install the retaining clip (1). Ensure that the clip is below the surface of the support.
63.
Remove the J 43773 tool.