K 2500 Truck 4WD V8-8.1L VIN G (2001)
9. In order to aid in alignment and assembly, install J 25025.
10. Install the control valve body gasket (6).
11. Install the control valve body assembly (5). Attach the manual valve to the detent lever while installing the control valve body assembly.
12. Install the transmission fluid pressure manual valve position switch (2).
13. Install the transmission fluid pressure manual valve position switch bolts (1) finger tight.
Notice: Refer to Fastener Notice in Service Precautions.
14. Tighten the bolts in the order shown.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
15. Remove the J 25025.