K 2500 Truck 4WD V8-8.1L VIN G (2001)
Flex Plate: Service and Repair
Engine Flywheel Replacement (Automatic Transmission)
Removal Procedure
1. Remove the transmission.
2. Remove the engine flywheel bolts.
3. Remove the engine flywheel.
4. Clean and inspect the engine flywheel.
Installation Procedure
Important: Make sure the flywheel is installed correctly. "Engine Side" is stamped on the flywheel to aid with installation.
1. Install the engine flywheel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine flywheel bolts.
2.1.
Tighten the engine flywheel bolts a first pass to 80 Nm (59 ft. lbs.).
2.2.
Tighten the engine flywheel bolts a final pass to 100 Nm (74 ft. lbs.).
3. Install the transmission.