K 2500 Truck 4WD V8-8.1L VIN G (2001)
1. Remove the shift lever.
2. Remove the shift lever from the shift tower.
3. Do not remove the shift lever adjusting nut.
4. Remove 4 plastic retainer plugs securing the shift boot retainer to the shift boot.
5. Remove the 4 screws securing the shift boot and insulator to the floor panel.
6. Remove the retainer and shift boot from the shift lever.
7. With a flat tool pull back the insulator to access the shift tower bolts.
8. Remove the 4 shift tower bolts securing the shift housing to the transmission.
9. Turn and release the shift tower and pull through the insulator.
Disassemble Procedure