K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Front Door Panel: Service and Repair
Panel Replacement
Cab / Chassis
Front Side Door Trim Panel Replacement
Tools Required
J 38778 Trim Panel Remover
Removal Procedure
1. Remove the door handle bezel.
2. Remove the window regulator handle, as necessary.
3. Disconnect the power accessory switch mounting panel wiring connector, as necessary.
4. Remove the trim panel upper extension.
5. Using a flatblade tool, carefully pry off the trim panel armrest screw cover in order to access the screw.
6. Remove the trim panel armrest screw.
7. Using the J 38778, carefully pry the retainer from the retainer seats.
8. Disconnect the courtesy light connector, if necessary.
9. Remove the trim panel from the door.
10. Remove the courtesy lamp lens or the reflector.
11. Pull the retainers from the slot in the trim panel.
12. Remove the retainers.
Installation Procedure
