K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the hinge fasteners.
Torque the bolts to 25 N.m (18 lb ft).
10. Position the rear body opening lower filler and mig weld in place at factory weld locations.
11. Clean and prepare all weld surfaces.
12. Refinish the metal surfaces as necessary.
13. Align and install all of the related panels and the components.
Rear Door Hinge Replacement
Rear Door Hinge Replacement
Removal Procedure-Cargo Upper
1. Visually inspect and restore as much of the damage as possible to factory specifications.
2. Remove all of the related panels and the components.
3. Remove any excess sealer surrounding the hinge.
