K 2500 Yukon 4WD V8-6.0L VIN U (2000)
1. Position the trim panel to the liftgate.
2. Slide the trim panel downward to engage mounting hooks.
3. Install the upper trim panel.
Tahoe, Yukon
REMOVAL PROCEDURE
1. Remove the door handle bezel.
2. Remove the window regulator handle, if equipped.
3. Remove the trim panel screws.
4. Slide the trim panel up in order to remove the trim panel from the door.
5. Disconnect the electrical connectors, if necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors, if necessary.
2. Align the retainers with the holes in the door.
3. Install the trim panel to the door by lowering the trim panel down into the retainer holes in order to seat the retainers.
4. Install the window regulator handle, as necessary.
NOTE: Refer to Fastener Notice in Cautions and Notices.
5. Install the trim panel screws.
Tighten
Tighten the trim panel screws to 2 N.m (18 lb in).
6. Install the door handle bezel.
Yukon XL