K 2500 Yukon 4WD V8-6.0L VIN U (2000)
1. Open the rear door.
2. Remove the rear door weatherstrip by pulling the weatherstrip from the track.
3. Remove the rear door weatherstrip from the rear door.
INSTALLATION PROCEDURE
1. Install the rear door weatherstrip on the rear door.
2. Install the rear door weatherstrip, by pressing in on the retainers until each retainer is fully seated.
3. Close the rear door.
Rear Compartment Lid Weatherstrip Replacement
Rear Compartment Lid Weatherstrip Replacement
Removal Procedure
1. Open the door(s).
