K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Trim Panel: Service and Repair
Body Rear Corner Garnish Molding Replacement
Body Rear Corner Garnish Molding Replacement
Removal Procedure
1. Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement (Tahoe/Yukon/Escalade/Suburban) .
2. Pull down on the upper corners of the garnish molding in order to disengage the retaining clips.
3. Pull in order to disengage the remaining retaining clips.
4. Remove the rear corner garnish molding from the vehicle.
5. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
1. Install the rear corner garnish molding to the vehicle.
2. Press on the rear corner garnish molding in order to engage the retaining clips.
3. Install the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement (Tahoe/Yukon/Escalade/Suburban) .
